| Length range |
700 – 4,000 mm (27.6 – 157.5 in) |
| 700 – 7,000 mm (27.6 – 275.6 in) |
| 700 – 10,000 mm (27.6 – 393.7 in) |
| Optional 150 mm (5.9 in) End length of twisted wires |
| Length accuracy |
+/– (0.1% + 1 mm [0.04 in]) |
| Strip lengths |
Side 1: 0.1 – 18 mm (0.004 – 0.7 in) |
| Side 2: 0.1 – 28 mm (0.004 – 1.1 in) |
| with short open ends processing set Side 2: 0.1 – 28 mm (0.004 – 1.1 in) |
| with open ends standard processing set |
|
| Wire cross-sections** |
2 × 0.22 mm² – 2 × 1.0 mm² (AWG 24 – 17) |
| with short open ends processing set |
| 2 × 0.22 mm² – 2 × 2.5 mm² (AWG 24 – 14) |
| with open ends standard processing set Optional with feasibility test from 0.13 mm² (AWG 26) |
| Open wire ends* (specifications without end processing) |
15 – 99 mm (0.6 – 3.9 in) with short open ends processing set |
| 30 – 99 mm (1.2 – 3.9 in) with open ends standard processing set |
| 30 – 125 mm (1.2 – 4.9 in) with long and unequal length open ends processing set on side 1 |
| Pitch length |
5 – 80 mm (0.2 – 3.2 in) programmable |
| Accuracy: ±10 %, max. ±5 mm (0.2 in) |
| Wire draw-in speed |
max. 5 m/s (16.4 ft/s) |
| Noise level |
|
| Electrical connection |
3 × 208 – 480 V / 50 – 60 Hz / 10 kVA |
| Compressed air connection |
5 – 8 bar (73 – 116 psi) |
| Recommended operating pressure*** |
6 ± 0.5 bar (87 ± 7.25 psi) |
| Weight |
including 2 crimp and 2 seal modules |
| Sigma 688 / 4 m: approx. 2350 kg (5181 lb.) |
| Sigma 688 / 7 m: approx. 2850 kg (6283 lb.) |
| Sigma 688 / 10 m: approx. 3410 kg (7518 lb.) |